Konica Minolta bizhub C4000i Service Manual page 91

bizhub C4000i/C3300i
[1]
[2]
[1]
[3]
[2] [2] [1]
8. To reinstall, reverse the order of removal.
4.2.6 Paper feed unit
1. Slide out the tray 1.
2. Remove the rear cover.
F.4.1.3 Rear cover
3. Open the right door.
4. Remove the IDC sensor assy.
F.4.7.1 IDC sensor (IDCS1)
[2]
[3] [1]
[1] [2]
F DISASSEMBLY/REASSEMBLY > 4. bizhub C4000i/C3300i
4. Remove the spring [1] from the spring holder [2].
5. Remove the cover [1].
6. Remove the E-ring [1] and two bushings [2].
7. Remove the manual bypass tray roller unit [3].
5. Remove the harness from three wire saddles [1], and disconnect two
connectors [2].
6. Remove the screw [3].
7. Remove the screw [1], and remove the cover [2].
F-14