Advertisement
bizhub C4000i/C3300i
8.1.6 Checking the transmission log
• The transmission log list will be output to be checked.
<Procedure>
1. Touch [CS Remove Care] -> [Maintenance/Default Settings] -> [Detail Setting].
2. Touch [Communication Log Print].
3. Load tray 1 or bypass tray with A4S paper.
4. Press the Start key to output transmission log.
8.1.7 Maintenance/Default Settings
(1) System Selection
• To select the system type for remote diagnosis.
• Use to newly build or change the system.
Setting value
E-Mail1
Use E-mail Bilateral communication.
E-Mail2
Use E-mail Unilateral communication.
http1
Use http Bilateral communication.
http2
Use http Unilateral communication.
Modem
Use modem communication
Fax
Use fax communication
Fax is available only when the optional fax kit is being installed.
(2) ID Code
To register the service ID.
<Procedure>
1. Touch [ID code] and enter the service ID.
• Enter a 7-digit code from the 10-key pad. (0000001 to 9999999)
2. Touch [ID code] to register the ID.
3. The [Detail Setting] will appear when the ID has been registered.
(3) Detail Setting
(a) Basic Settings
• Execute the primary setting.
• Use to register the machine to the CS Remote Care center.
Center Setting
• It will be displayed when "E-Mail1" or "E-Mail2" is selected in System Setting.
Setting item
Center ID
Set the center ID.
When all setup procedures are completed, the center ID is displayed.
Device ID
Display the device ID.
It can only be displayed but not be changed.
E-mail Address
Set the center E-mail address.
When all setup procedures are completed, the center E-mail address is
displayed.
Encryption
Set whether or not to encrypt E-mail.
When all setup procedures are completed, the details of setting is displayed.
Schedule
• It will be displayed when or "E-Mail2" is selected in System Setting.
• To set the schedule of notification to the center.
• Up to three different notification schedules can be registered.
<Procedure>
1. Select the key of the registration number, and then touch [Enable].
2. Select the notification cycle from [Day], [Week], or [Month].
• When selecting [Day] for the notification cycle, set the Day Frequency.
• When selecting [Week] for the notification cycle, set the Week Frequency and day of the week.
• When selecting [Month], set the Month Frequency and the date of the month.
3. Touch [SET] to register the schedule.
Center Notifi. Item
• It will be displayed when or "E-Mail2" is selected in System Setting.
• To set whether or not to report to the Center.
• To report to the center, select the notification item to the center.
Setting item
No Notification
[1]
Contents
Select it to disable the report to the center.
Sales count data
Contents
Contents
I-16
I SERVICE MODE > 8. CS Remote
Default setting
○
Setting value
Default setting
5-digit
00000
alphanumeric
characters
13-digit
-
alphanumeric
characters
Alphanumeric
-
characters and
symbols (up to
129 characters)
Yes
No
○
Advertisement
