Advertisement
bizhub C4000i/C3300i
2. ENHANCED SECURITY
2.1 Outline
Starting procedure
1. Call the initial screen of Service Mode.
2. Press the following keys in this order.
• Stop -> 0 -> Clear
3. Call the Enhanced Security screen.
Exiting procedure
1. Touch [Exit].
2. Turn OFF the main power switch. Wait 10 seconds, then turn ON the main power switch again.
2.2 CE Password
• To set and change the CE password.
• The CE password needs to be 8 to 64 one-byte alphameric characters and symbols.
• Default setting: 9272927292729272
<Procedure>
1. Current Password: Enter the currently using CE password.
2. New Password: Enter the new CE password.
3. Re-input Password: Enter the new CE password again.
NOTE
▪ When Password Rules of [Administrator] -> [Security] -> [Security Details] is set to "ON," new passwords cannot contain the
same string of characters nor can be previous passwords be used.
▪ A new password is set when starts from the service mode after changing.
▪ NEVER forget the CE password. When forgetting the CE password, call responsible person of KM.
2.3 Administrator Password
• To set and change the administrator password.
• Use this function when the administrator forget the administrator password because a new password can be set without entering the
current administrator password with this.
• The administrator password needs to be 8 to 64 one-byte alphameric characters and symbols.
• Default setting: 1234567812345678
<Procedure>
1. New Password: Enter the new administrator password.
2. Re-input Password: Enter the new administrator password again.
NOTE
▪ When Password Rules of [Administrator] -> [Security] -> [Security Details] is set to "ON," new passwords cannot contain the
same string of characters nor can be previous passwords be used.
2.4 Administrator Feature Level
• To set which modes to be allowed for the administrator to use in Service Mode.
• Use when allowing the administrator to use some modes in Service Mode.
Setting item
Level1
Extend the administrator function Level 1.
Level2
Extend the administrator function Level 2.
Prohibit
Prohibit the administrator feature extend.
Administrator feature level extension item
System Settings
Expert Adjustment
Standard Size Setting Original Glass Original Size Detect
2.5 CE Authentication
• To determine whether or not to authenticate CE password as entering Service Mode.
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 2. ENHANCED
Contents
Administrator settings function
Printer Adjustment
Erase Leading Edge
Vertical Adjustment
Scanner Area
Scanner Adjustment: Leading Edge
Scanner Adjustment: Centering
Horizontal Adjustment
Vertical Adjustment
ADF Adjustment
Centering
Original Stop Position
Centering Auto Adjustment
Auto Adj. of Stop Position
User Paper Settings
Foolscap Size Setting
J-17
SECURITY
Default setting
○
Level 1
Level 2
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
Advertisement
