Advertisement
bizhub C4000i/C3300i
3. Touch [Engine FW DipSW].
4. Touch [46] and check the key is highlighted (ON state) in reverse video.
5. Touch [END].
NOTE
▪ To reflect the adjustment value after change, make sure to exit from the Service Mode.
▪ The adjustment value is not reflected when turning off the power without exiting from the Service Mode.
(17) Choice of changing 2nd transfer roller life detection condition
• Choice to change the conditions for detecting 2nd transfer roller life
Switch No.49
Contents
OFF
To work out consumption ratio from prints count or drive distance, and set the life information for
the higher ratio.
ON
To work out the consumption ratio from prints count or drive distance, and set the life information
for the higher ratio. Also, using the consumption ratio worked out from the AT2VC detected
voltage to set the final life information.
(18) Choice of changing photoconductor life detection condition
• Choice to change the conditions for detecting photoconductor life
Switch No.50
Contents
OFF
To work out consumption ratio from prints count or PU drive distance, and set the life
information for the higher ratio.
ON
To work out the consumption ratio from prints count or PU drive distance, and set the life
information for the higher ratio. Also, using the consumption ratio worked out from the
photoconductor/K charging current detected value to set the final life information.
(19) Choice of following-up properties in early morning
Degrade the productivity by using thick plain paper to enhance the following-up properties in the early morning.
Switch No.55
OFF
ON
(20) Choice of disabling duplex tacking PPM
• To widen the interval between print jobs for preventing paper stacking from occurring in the paper exit tray during consecutive 2-sided
printing.
Switch No.56
OFF
ON
NOTE
▪ Not available to 1-sided printing.
▪ Not available to 2-sided printing on paper other than plain paper, plain paper+ and recycled paper.
(21) Choice of AT1VC high frequency
• Choice to switch to mode for conducting AT1VC frequently
Switch No.31
OFF
ON
Procedure
1. Call the Service Mode to the screen.
2. Call the Enhanced Security to the screen.
3. Touch [Engine FW DipSW].
4. Touch [31] and check the key is highlighted (ON state) in reverse video.
5. Touch [END].
NOTE
▪ To reflect the adjustment value after change, make sure to exit from the Service Mode.
▪ The adjustment value is not reflected when turning off the power without exiting from the Service Mode.
2.11 Storage Data Backup
• Backup the settings of the machine and the image data in the box to the HDD connected with a USB.
• Restore the backup data to the HDD connected with a USB.
Setting item
Generic format Backup
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 2. ENHANCED
Contents
Plain paper 3 is used for PPM12.
Plain paper 2 and 3 is used for PPM12.
Contents
OFF
ON
Contents
Normal mode
High frequency mode
Store the setting data for this machine as an XML data and store the data saved in the box as a TIFF-C
image to the HDD. However, a data that is saved at 1200dpi in the box cannot be backed up.
Since the free space in the HDD for backup cannot be checked beforehand, after starting the backup, it will
be terminated as an error at the time that no space remained in the HDD.
Contents
J-24
SECURITY
Default
○
Default
○
Default
○
Default
○
Default
○
Advertisement
