Advertisement
bizhub C4000i/C3300i
WebDAV Synchronize
• To set whether to synchronize with [WebDAV Client Settings] in Administrator settings.
• When [Synchronize] is set, operation is performed in accordance with the configuration of the [WebDAV Client Settings] within the
Administrator settings.
Synchronize
Do not Synchronize
Proxy Server
• To configure the proxy server settings.
NOTE
▪ It will be not displayed when [WebDAV Synchronize] is set to [Synchronize].
Setting item
Host Name
User Name
Password
Port Number
15.2.3 Maintenance Setting
Identification Code
• To enter the identification code used to organize and manage multiple MFPs on a per-customer basis.
Setting range
0 to 99999999 (8-digit number)
Operator Name
• To enter the keywords used by maintenance personnel to easily search for corresponding MFPs on the remote service server UI screen.
Setting range
Alphanumeric characters/symbols/space (up
to 64 characters)
Setup
• To connect to the remote service server manually.
• Touch Start to send the identification code and operator name to the remote service server.
15.2.4 XMPP Settings
Function setting
• To set whether to use sessions when communicating with the XMPP server.
NOTE
▪ When [Disable] is set, initial commands cannot be received from the remote service server via the XMPP server.
ON
Disable
Connection Setting
Setting item
Repeat Interval
To set the repeat interval used when communication with the XMPP server fails.
Connection Time-out
To set the timeout used for communication with the XMPP server.
SSL
To set whether to use the SSL when communicating with the XMPP server.
BOSH
To set whether to use the BOSH connection when communicating with the XMPP
server.
Connection server info
• To confirm the URL, ID, domain name, port number and connection status.
15.2.5 Always Connection Setting
Maintenance Time
• Specify the maintenance time.
Setting item
User Power Save Settings
Always Connection
Individual Settings
Setting item
Address or host name
• Address: IPv4 or IPv6 address
• Host name: Alphanumeric characters and symbols up to 253 characters
Alphanumeric characters and symbols: 0 to 63 characters
Alphanumeric characters and symbols: 0 to 63 characters
1 to 65535
Description
Note the hierarchical order: First 2 digits represent the region code and the last 6 digits represent
the management code.
Description
Specify the operator name.
Setting item
Operates when maintenance can be performed in accordance with power save settings.
Maintenance can be performed at any time.
Maintenance start and end times are configured individually.
Setting
Description
Description
I-55
I SERVICE MODE > 15. Network Settings
Default setting
○
Default setting
○
Setting
Default setting
1 to 5 Minutes
5 to 300 Sec
ON
OFF
ON
OFF
Default setting
1 Minute
60 sec.
○
○
○
Advertisement
