Advertisement
bizhub C4000i/C3300i
Setting value
Detail
Mode 1 *
• Rotates the fusing roller for a certain distance when the machine has been in standby mode for over
6 hours.
• Rotates the fusing roller for a certain distance when the machine has been in energy save mode for
over 13 days.
• (Energy save mode in this case does not include sub power OFF mode and ErP Auto Power OFF
mode.)
Mode 2 *
• Rotates the fusing roller for a certain distance when the machine has been in standby mode for over
6 hours.
• Rotates the fusing roller for a certain distance when the machine has been in energy save mode for
over 13 days.
• (Energy save mode in this case does not include sub power OFF mode and ErP Auto Power OFF
mode.)
• Rotates the belt for 30 seconds while warming the fusing unit up to a certain temperature during the
warmup process or when starting to print in order to prevent belt deformation.
*: Perform the following steps when selecting this setting to an option other than [OFF].
• When setting the [Weekly Timer ON/OFF Settings] found under [Administrator Settings] -> [System Settings] -> [Weekly Timer Settings] to
[ON], select the energy save mode when the weekly timer is turned off to [Sleep].
• Select [Power Save] in the [Power Key Setting] found under [Administrator Settings] -> [System Settings] -> [Power Supply/Power Save
Settings].
• Do not turn off the main power switch.
• Do not turn off the sub power switch. (Do not long-press the power key.)
I-41
I SERVICE MODE > 10. System 2
Default setting
Advertisement
