Advertisement
bizhub C4000i/C3300i
[1]
[1]
[3]
[2]
[1]
[2]
[5]
[7]
[5]
[1]
[6]
[2]
[4]
[2]
16. To reinstall, reverse the order of removal.
4.4.5 Tray 1 lift-up motor (M6)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Remove the DC power supply.
F.4.3.3 DC power supply (DCPS)
[1]
[2]
[3]
[2]
5. To reinstall, reverse the order of removal.
[3]
[3]
F DISASSEMBLY/REASSEMBLY > 4. bizhub C4000i/C3300i
8. Remove the cover [1].
9. Incline the control panel [1] to about 45 degrees.
10. Pull out the cover [2] from under the cover [3].
11. Remove the harness from the harness guide [1].
12. Remove three screws [2], and remove the toner supply unit [3].
13. Remove the harness from the wire saddle [1].
14. Remove the two screws [2] and the connector [3], and remove the toner supply
motor/YM [4].
15. Remove the two screws [5] and the connector [6], and remove the toner supply
motor/CK [7].
3. Disconnect the connector [1].
4. Remove three screws [2], and remove the tray 1 lift-up motor [3].
F-27
Advertisement
