Advertisement
bizhub C4000i/C3300i
NOTE
▪ It will not be displayed when [Service Mode] -> [Network Settings] -> [Remote Service Setting] -> [Function Settings] -> [Enable
Settings] is set to "ON." [Machine Auto Update setting] in "Administrator" is not applicable.
▪ When the SMB protocol used, the MFP uses static IP addresses.
Server 1 Settings
Setting item
Auto Update
Server Name
Download Protocol
SMB Setting Host Name
File Path
User Name
Password
Number of retries Set the number of times to retry when failed to obtain.
HTTP
URL
Setting
User Name
Password
Proxy
Connection Time-
out
Server 2 settings
Setting item
Auto Update
Server Name
HTTP
URL
Setting
User Name
Password
Proxy
Connection Time-
out
Common Settings
• Configure the common settings for [Server 1 settings] and [Server 2 settings].
To set whether or not to use the auto update setting.
• When [ON] is selected, configure the settings for Acquisition
protocol.
To set an arbitrary server name to identify the connection destination.
To set the protocol for acquiring an update data.
• If the MFP relay server is used as a server on the data providing
side, select [HTTP].
Set the host name for the SMB server.
Set the file path used for SMB server communication.
• Specify the folder in which C_UpdateList.ini is stored.
Set the user name used to access the SMB server.
Set the password used to access the SMB server.
Set the address of the http server.
• Specify the folder in which C_UpdateList.ini is stored.
Set the user name used to access the relay server by http protocol.
Set a password used to access the http server.
To set whether or not to use the proxy server.
• If [ON] is selected, set the proxy with [Administrator] -> [Network] ->
[Machine Update Settings] -> [HTTP Proxy Settings].
To set the time for the timeout for accessing the server.
To set whether or not to use the auto update setting.
• When [ON] is selected, configure the settings for Acquisition
protocol.
To set an arbitrary server name to identify the connection destination.
To set the address of the http server.
• Specify the folder in which C_UpdateList.ini is stored.
Set the user name used to access the relay server by http protocol.
Set a password used to access the http server.
To set whether or not to use the proxy server.
• If [ON] is selected, set the proxy with [Administrator] -> [Network] ->
[Machine Update Settings] -> [HTTP Proxy Settings].
To set the time for the timeout for accessing the server.
I SERVICE MODE > 16. Machine Update Setting
Description
Description
I-61
Setting
Default
setting
ON
OFF
○
Alphanumeric
Server1
characters (up to 20
characters)
SMB
○
HTTP
Alphanumeric
-
characters and
symbols (up to 253
characters)
Up to 255 characters
-
Up to 64 characters
-
Alphanumeric
-
characters and
symbols (up to 64
characters)
0 to 10 count
3 times
Alphanumeric
-
characters and
symbols (up to 253
characters)
Up to 64 characters
-
Alphanumeric
-
characters and
symbols (up to 64
characters)
ON
OFF
○
30 - 300
60 Sec.
Setting
Default
setting
ON
OFF
○
Alphanumeric
Server2
characters (up to 20
characters)
Alphanumeric
-
characters and
symbols (up to 253
characters)
Up to 64 characters
-
Alphanumeric
-
characters and
symbols (up to 64
characters)
ON
OFF
○
30 - 300
60 Sec.
Advertisement
