Advertisement
bizhub C4000i/C3300i
Key name
Mobile Connection Settings
6.3.9 Set Paper Name by User
Key name
Set Paper Name by User
Edit Paper Name
6.3.10 List/Counter
Key name
Meter Count and Device
Confirmation Tx Settings
Management List
Paper Size/Type Counter
6.3.11 Temporary Change Language
Key name
Temporary Change Language
6.3.12 Main Menu Default (Basic Style)
Key name
Main Menu Default (Basic
Style)List
6.3.13 Bypass Tray Overwrite Settings for Print PC
Key name
Bypass Tray Overwrite Settings
for Print PC
6.3.14 Network Selection Settings
Key name
Network Selection Settings Default Network Settings
Network Name Change
6.3.15 Paper Size/Type Settings Screen Display
Key name
Paper Size/Type Settings
Screen Display
Simple Connection Setting
Wireless Connection Setting
Touch Connection Link
Application Settings
-
It will be displayed when Set Paper Name by User is enabled.
• The counter information is collected via CS Remote Care.
• Though this setting is enabled, the information is not sent if [Service Mode] -> [System 2] -> [Acquiring
Settings] is set to "OFF."
It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] is set to
"Vendor 2." (It will be displayed when the Key Counter is mounted when [Service Mode] -> [System 2] ->
[Software Switch Setting] shows that switch No.33 is set to [00000001] at Bit assignment/[01] at HEX
assignment.)
-
The temporarily enabled language is returned to the language configured in [User Settings] after any of the
following operations.
• Main power switch OFF
• Power key OFF
• Sleep mode
• Low power mode
• System Auto Reset
• Logout
-
-
It will be displayed when [Administrator] -> [Network] -> [VLAN Settings] is
enabled.
-
Function/Precondition
QR Code
-
Display Setting
Enable NFC
This setting is synchronized with [Admin.] - [User Auth/
Account Track] -> [Authentication Type] -> [Enable NFC].
Enable
• It will be displayed when the optional local interface kit
Bluetooth LE
(voice guidance/Bluetooth LE enabled) is mounted.
• This setting is synchronized with [Administrator
Settings] - [User Authentication/Account Track] ->
[General Settings] -> [Enable Bluetooth LE].
When [Admin.] -> [Network] -> [Network I/F Configuration] is set to [Wireless
Only], a pairing is established by applying the wireless settings of this
machine; therefore, this setting is not displayed.
-
Function/Precondition
Function/Precondition
Function/Precondition
Function/Precondition
Function/Precondition
Function/Precondition
Function/Precondition
H-10
H UTILITY MODE > 6. Administrator
Advertisement
