Setting Date And Time; Date Format - Kyocera ECOSYS M2135dn Service Manual

(7) Default (TSI model)
Before using this machine, configure such settings as date and time, network configuration, and energy saving functions
as needed. The Machine Setup Wizard is launched when the equipment is turned on for the first time after being
installed. Also, configure the following settings if necessary.
NOTE
The default settings of the machine can be changed in System Menu.
Refer to the operation guide of the main unit about the items which can set from the system menu.

(7-1) Setting Date and Time

Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of
the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
NOTE
The correct time can be periodically set by obtaining the time from the network time server.
See page Command Center RX User Guide.
1. Displays the screen.
[System menu / counter] key > [Date/Timer/Energy Saver]
2. Configure the settings.
Select [Time Zone] > [Date/Time] > [Date Format] in this order for settings.
Time Zone
Date/Time

Date Format

Item
Set the time difference from GMT. Choose the nearest listed location from
the list. If you select a region that utilizes summer time, configure settings
for summer time.
Set the date and time for the location where you use the machine. If you
perform Send as E-mail, the date and time set here will be displayed on the
header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23),
Minute (00 to 59), Second (00 to 59)
Select the display format of year, month, and date. The year is displayed in
Western notation.
Value: Month/Day/Year, Day/Month/Year, Year/Month/Day
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Descriptions
2-10