Kyocera ECOSYS M2135dn Service Manual page 339

U633 Communication control procedures 4
(Message: Communication Control 4)
Contents
Sets the FAX communication.
Purpose
Reducing the error communication when using a low quality line
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
V.34
V.34-3429Hz
DIS 2Res
RTN Check
Setting: V.34
Sets whether to enable/disable the V.34 communication individually for transmission and recep-
tion.
1.Select the item to set.
Items
On
TX
RX
Off
* :Initial setting: On
2.Press the [Start] key to set the setting value.
* :"Completed" is displayed.
Setting: V.34-3429Hz
Sets if the V.34 symbol speed 3429 Hz is used.
1.Select the item to set.
Items
On
Off
* :Initial setting: On
2.Press the [Start] key to set the setting value.
* :"Completed" is displayed.
Enables or disables the V.34 communication.
Sets the V.34 symbol speed (3429 Hz).
Sets the number of times of DIS signal reception.
Sets the reference for the RTN signal output.
V.34 communication is enabled for both transmission and reception.
V.34 communication is enabled for transmission only.
V.34 communication is enabled for reception only.
V.34 communication is disabled for both transmission and reception.
V.34 symbol speed 3429 Hz is used.
V.34 symbol speed 3429 Hz is not used.
6-84
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Contents
Contents
Contents