Kyocera ECOSYS M2135dn Service Manual page 464

(2) Error codes
Error codes
U00000/E00000 No response or busy every time though redialing in the specified times.
U00100/E00100 Press the [Stop] key.
U00200/E00200 Reception was interrupted by a press of the [Stop] key.
U00300/E00300 Destination receiver machine is out of paper during transmission.
U004XX/E004XX Communication was interrupted due to the function unmatch when receiving the call
(Receiver).
Error corresponding to U004XX (Phase B interruption) (See page P.7-92).
U00500/E00500 Unable to call due to interruption during multi communications (destination not called
after interruption).
U006XX/E006XX Communication was interrupted due to trouble of the own machine.
Error corresponding to U006XX (Machine problem) (See page P.7-93).
U00700/E00700 Communication was interrupted because of a problem in the destination unit.
U008XX/E008XX Some pages were not correctly transmitted when transmitting in the G3 mode.
Error corresponding to U008XX (Part of transmission error) (See page P.7-93).
U009XX/E009XX Some pages were not correctly received when receiving in the G3 mode.
Error corresponding to U009XX (Part of transmission error) (See page P.7-93).
U010XX/E010XX Communication was interrupted due to signal errors during transmission in the G3 mode.
Error corresponding to U010XX (Transmission in G3 mode) (See page P.7-94).
U011XX/E011XX Communication was interrupted due to signal errors during reception in the G3 mode.
Error corresponding to U011XX (Reception in G3 mode) (See page P.7-96).
U01400/E01400 Invalid one-touch key, etc. were designated during communication.
U01500/E01500 A communication occurred at V.8 mode when calling.
U01600/E01600 A communication error occurred in V.8 mode when answering the call.
U017XX/E017XX A communication error occurred before starting the T.30 .protocol when transmitting in
V.34 mode.
Error corresponding to U017XX (Transmission in V.34 mode) (See page P.7-97).
U018XX/E018XX A communication error occurred before starting the T.30 protocol when receiving in V.34
mode.
Error corresponding to U018XX (Reception in V.34 mode) (See page P.7-98).
U02000/E02000 Relay multicast is denied by the relay station because permission ID and permission
phone number dot not match when instructing relay.
U02100/E02100 Destination machine (relay station) has no relay multicast function when instructing
relay.
U02200/E02200 Instruction station instructs relay but unable to relay because of designating phone num-
ber not registered in relay station. Or, replay station is requested for relay but phone
number not registered in relay station is designated and relay multicast is not available.
Or, dialing registered in the interoffice sub address box is deleted and relay multicast is
not available.
U023XX/E023XX When receiving relay instruction, receiver information is not correctly received.
Error corresponding to U023XX (relay instruction reception error) (See page P.7-98).
U02400/E02400 Interrupted because the interoffice sub address box No. designated when sending the
interoffice sub address instruction between own company machines does not match.
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Content
7-89