Kyocera ECOSYS M2135dn Service Manual page 367

Altitude Adj.
Description
Sets the altitude adjustment mode.
Purpose
Execute when print quality deteriorates in the installation at the altitude of 1,001 meters or higher
Method
1.Enter the Service Setting menu.
2.Select [Altitude adjustment].
3.Select [Normal], [1001 - 2000m], [2001 - 3000m] or [3001 - 3500m] and confirm the setting
value.
Completion
Press the [System Menu/Counter] key.
MC
Contents
Sets the main charger output.
Purpose
Execute it when the image density deterioration, background image or offset image has
occurred.
Method
1.Enter the Service Setting menu.
2.Select [MC].
3.Using the [▲] or [▼] key, select the setting "1" to "7" and set the setting value.
Completion
Press the [System Menu/Counter] key.
Memory diagnostics
Contents
Diagnose memory at power-up (whether reading and writing are executable).
Purpose
Check if the memory device is defective that may cause an unresolvable F-code error, locking or
abnormal images. Checks the memory failure.
Method
1.Enter the Service Setting menu.
2.Select [Memory diagnosis].
3.Press [Start].
4.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [System Menu/Counter] key.
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
6-112