Kyocera ECOSYS M2135dn Service Manual page 291

3.Press the center of "+".
4.The touch panel is automatically corrected
after setting.
5.After finishing setting, the [Check] screen is
automatically displayed.
Method: Check
1.Press the indicated three "+", and then check
the display position.
2.Check that the gap of the X and Y axis of the
displayed coordinate is 6 or less.
* :If out of the specified value, select [Initial-
ize] and press the [Start] key to return to
Step.1.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
+
Initialize
+
6-36
+
+