Kyocera ECOSYS M2135dn Service Manual page 245

4. Disconnect three connectors (b) from
the PF main PWB (a).
5. Remove the sheet(c) and open the wire
saddle(d).
6. Remove the fixed screws(M3x8TP)(e)
of the earth spring(f).
7. Disconnect two clutch connectors (a).
8. Remove six screws(M3x8S tight)(b)
and two ground terminals(c).
9. Detach the drawer support part (d).
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
e
f
d
Figure 4-283
a
d
b
b
c
b
Figure 4-284
4-153
b
c
a