Kyocera ECOSYS M2135dn Service Manual page 60

1. Power switch ........................................ Switching on and off the main/engine PWB and the operation
2. Paper sensor ........................................ Detecting the presence of paper on the cassette.
3. Registration sensor .............................. Controlling the timing to start the secondary paper feeding.
4. Toner sensor ....................................... Detecting the toner amount inside the developer unit.
5. MP paper sensor .................................. Detecting the presence of paper on the MP tray.
6. Temp/Humid sensor ............................. Detecting the external temperature and humidity
7. Interlock switch .................................... Shutting off the 24V power line when the front cover is opened.
8. Thermopile ........................................... Detecting a surface temperature of the fuser belt.
9. In-machine temperature sensor ........... Detecting in-machine temperature.
10. Waste toner sensor .............................. Detecting the toner amount inside the waste toner box.
11. Home position sensor .......................... Detecting the position of the image scanner unit.
12. CIS ....................................................... Scanning the frontside original data.
13. Eject sensor ......................................... Detecting the paper jam at the fuser section.
14. Press-release sensor ........................... Detecting the mode of the fuser pressure.
15. Fuser edge thermistor .......................... Detecting the heat roller temperature (Edge).
16. Rotation detecting sensor .................... Detecting the fuser rotation position
17. DPCIS *1 .............................................. Scanning the backside original data.
18. DP front side timing sensor .................. Detecting the conveying timing of original front side.
19. DP back side timing sensor *1 ............. Detecting the conveying timing of original back side.
20. DP paper feed sensor .......................... Detecting the original paper feed timing.
21. DP open/close sensor .......................... Detecting the opening and closing of the document processor.
22. DP original sensor ................................ Detecting the presence of the original in the document processor.
23. Paper sensor ........................................ Detecting the presence of paper on the PF cassette.
24. PF feed sensor ..................................... Detecting the conveying timing of PF paper
*1: 40 ppm model only
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA-2
panel PWB, etc.
3-11