Kyocera ECOSYS M2135dn Service Manual page 471

(2-6) U011XX G3 reception error
Error codes
U01100/E01100
The function indicated by the DCS signal does not match the own machine.
U01101/E01101
Functions indicated by the NSS signal (except communicating type) does not match the
own machine.
U01102/E01102
DTC (NSC) signal was received without transmission data at the own machine.
U01110/E01110
No response is received after sending DIS signal.
U01111/E01111
No response is received after sending DTC (NSC) signal.
U01112/E01112
Training is not received after sending CFR signal.
U01113/E01113
No response is received after sending FTT signal.
U01114/E01114
No message is received after sending CFR signal.
U01115/E01115
No message is received after sending CFR signal.
U01116/E01116
No message is received after sending PPR signal.
U01117/E01117
No message is received after sending CTR signal.
U01118/E01118
No message is received after sending err signal.
U01119/E01119
No significant signal is received after receiving message.
U01120/E01120
No response is received after sending MCF signal.
U01121/E01121
No response is received after sending RTP signal.
U01122/E01122
No response is received after sending RTN signal.
U01123/E01123
No response is received after sending RIP signal.
U01124/E01124
No response is received after sending RIN signal.
U01125/E01125
No response is received after sending the CNS signal.
U01126/E01126
No response is received after sending PPR signal (ECM).
U01127/E01127
No response is received after sending ERR signal (ECM).
U01128/E01128
No response is received after sending RNR signal (ECM).
U01129/E01129
No response was received after sending SPA signal (Short protocol).
U01140/E01140
DCN signal is received after sending DIS signal.
U01141/E01141
DCN signal is received after sending DTC signal.
U01142/E01142
DCN signal is received after receiving DCS or NSS signal.
U01143/E01143
DCN signal is received after sending FTT signal.
U01144/E01144
DCN signal is received after sending CFR signal.
U01145/E01145
DCN signal is received after receiving DCN signal.
U01146/E01146
DCN signal is received after sending MCF signal. (Communication between own com-
pany machines such as the one after MPS, EOM signals and confidential)
U01147/E01147
DCN signal is received after sending RTP signal.
U01148/E01148
DCN signal is received after sending RTN signal.
U01149/E01149
DCN signal is received after sending PIP signal.
U01150/E01150
DCN signal is received after sending PIN signal.
U01151/E01151
DCN signal is received after sending PPR signal (ECM).
U01152/E01152
DCN signal was received after sending CTR signal (ECM).
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Content
7-96