Default Settings Of The Machine; Setting Date And Time - Kyocera ECOSYS MA4500fx Operation Manual

Installing and Setting up the Machine > Default Settings of the Machine

Default Settings of the Machine

Before using this machine, configure such settings as date and time, network configuration, and energy saving
functions as needed.
NOTE
The default settings of the machine can be changed in System Menu.
For settings that are configurable from System Menu, refer to the following:
Setup and Registration (System Menu) (page 8-1)

Setting Date and Time

Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header
of the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
NOTE
• Be sure to set the time difference before setting the date and time.
• The correct time can be periodically set by obtaining the time from the network time server.
Command Center RX User Guide
1
Display the screen.
[System Menu/Counter] key > [ ] [ ] key > [Common Settings] > [OK] key > [ ] [ ] key > [Date Setting] >
[OK] key
2
Configure the settings.
[ ] [ ] key > [Time Zone] > [OK] key > Select the time zone > [OK] key > [ ] [ ] key > [Date/Time] > [OK] key
> Set the date/time > [OK] key > [ ] [ ] key > [Date Format] >
[OK] key > Select the Date Format > [OK] key
Item
Time Zone
Date/Time
Date Format
NOTE
Select the
[ ] or [ ]
Select the
[ ] or [ ]
Set the time difference from GMT. Choose the nearest listed location from the list. If
you select a region that utilizes summer time, configure settings for summer time.
Set the date and time for the location where you use the machine. If you perform
Send as E-mail, the date and time set here will be displayed on the header.
Value: Year (2000 to 2037), Month (01 to 12), Day (01 to 31),
Hour (00 to 23), Min. (00 to 59), Second (00 to 59)
Select the display format of year, month, and date. The year is displayed in Western
notation.
Value: Month/Day/Year, Day/Month/Year, Year/Month/Day
key to enter a number.
key to move the position being entered, which is shown highlighted.
Description
2-17