Kyocera ECOSYS M2135dn Service Manual page 296

U260 Select Copy Count
(Message: Set Count Mode)
Contents
Switches the count timing for the total counter and other counters between paper feed and eject.
Purpose
Change the count timing according to the user's request
Setting
1.Press the [Start] key.
2.Selects the copy count timing.
Items
Feed
Eject
* :Initial setting: Eject
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U285 Set Service Status Page
(Message: Set Svc Sts Page)
Contents
Determines whether to display the digital dot coverage report on the report print.
Purpose
Change the setting according to the user's request
Setting
1.Press the [Start] key.
2.Select the item to set.
Items
On
Off
* :Initial setting: On
3.Press the [Start] key. Set the setting value.
Completion
4.Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
When secondary paper feed starts.
Selects the paper eject timing
Displays the digital dot coverage.
Not to display the digital dot coverage.
6-41
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Contents
Contents