Kyocera ECOSYS M2135dn Service Manual page 285

U071 Adjusting the DP leading edge Timing
(Message: DP Timing)
Contents
Adjusts the DP original scanning timing.
Purpose
Adjusted if there is a regular error between the leading or trailing edges of the original and the
copy image when the DP is used
Method
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Place an original on the DP and press the [Start] key to make a test copy.
* :Check the duplex scanning by setting [Duplex] when test copying.
4.Press the [System Menu] key.
5.Select the item to adjust.
Items
Front Head
Front Tail
Back Head *1
Back Tail *1
*1: 40 ppm model only
Contents
Leading edge registration. (Front page)
Trailing edge registration. (Front page)
Leading edge registration. (Back page)
Trailing edge registration. (Back page)
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Setting
-32 to 32
-32 to 32
-32 to 32
-32 to 32
6-30
Initial
range setting variation
0 0.195
(mm)
0 0.195
(mm)
0 0.195
(mm)
0 0.195
(mm)
Data