8. Push both side hooks (b) of DP sepa-
rate pad assembly (a) inside and
detach it from the document processor
(c).
9. Check the pickup pulley, DP paper feed
roller and DP separate pad assembly
(a) and clean or replace it.
10. Reattach the parts in the original posi-
tion.
IMPORTANT
When replacing with new DP paper feed roller
assembly or DP separation pad assembly, pay
attention not to touch the roller surface.
(6-2)Detaching and reattaching the DP front cover
Procedures
1. Open the DP upper cover (a).
2. Twist two hooks (c) of the DP front
cover to release them and detach the
DP front cover (b).
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
b
Figure 4-268
a
c
c
b
Figure 4-269
4-145
b
a
c