Kyocera ECOSYS M2135dn Service Manual page 298

U290 Setting the drive to save the HyPAS application
(Message: Set Drive App)
Contents
Sets the drive to save the HyPAS application
* :Indicated when the HyPAS application is not installed in the SD card and SSD.
Purpose
Sets to save to the SD card or optional SSD.
Setting
1.Press the [Start] key.
2.Select the item to set.
Items
SD Card
SSD
* :Initial setting: SD card (0)
3.Press the [Start] key. Set the setting value.
4.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Set in the SD card
Set in the SSD
6-43
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
*: Tsi 40 ppm model only
*: Only when the SD card or
SSD is installed
Contents