Kyocera ECOSYS M2135dn Service Manual page 348

U660 Ring setting
(Message: Set Calls)
Contents
Sets the NCU (network control unit).
Purpose
Execute as required
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
Exchange
Dial Tone
Busy Tone
PBX Setting
DC Loop
Setting: Exchange
Selects if the FAX is connected to either a PBX or public switched telephone network.
1.Select the item to set.
Items
PSTN
PBX
* :Initial setting: PSTN
2.Press the [Start] key to set the setting value.
* :"Completed" is displayed.
Setting: Dial Tone
Selects whether or not to check for a dial tone to check if the telephone is off the hook when a fax
is connected to a public switched telephone network.
1.Select the item to set.
Items
On
Off
* :Initial setting: On
2.Press the [Start] key to set the setting value.
* :"Completed" is displayed.
Setting the PBX/PSTN connection
Sets the PSTN dial tone detection.
Sets the busy tone detection.
Setting the PBX connection
Sets the loop current detection before dialing.
Connected to the public switched telephone network.
Connecting to the PBX
The dial tone is detected.
The dial tone is not detected.
6-93
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Contents
Contents
Contents