Kyocera ECOSYS M2135dn Service Manual page 140

(2-5)Detaching and reattaching the ISU top frame
Procedures
1. Remove two screws(c).
2. Release five protrusions (d) of the ISU
upper frame in the direction of arrow.
3. Release three hooks (f) of the ISU
upper frame from the fixed section (e)
of the ISU lower frame while lifting up
the rear side of ISU upper frame.
4. Detach the ISU upper frame (b) from
the ISU lower frame (a).
IMPORTANT
When detaching the ISU upper frame, pay
attention not to touch the contact glass.
Also wipe it with a dry cloth when it is dirty.
(2-6)Detaching and reattaching the scanner carriage assembly
Procedures
1. Disconnect FFC (d) from the connector
(c) of the ISU carriage.
2. Detach the drive belt (f) from the ISU
carriage fixed section (e).
3. Detach the ISU carriage(b) from ISU
lower frame (a).
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
d
b
d
f
e
Figure 4-85
c
d
b
a
Figure 4-86
4-48
c
d
d
d
a
f
c
e