Kyocera ECOSYS M2135dn Service Manual page 410

Num- Contents
ber
F3AX,
Abnormality detecting in the Entity Manage-
F3BX,
ment Department
F3CX,
F3DX,
F3EX,
F3FX,
F40X,
F41X,
F42X,
F43X,
F44X,
F45X
F46X
Abnormality detecting of a printer rendering part (1) Exchange a Main/Engine PWB and perform an operation check.
F47X,
Abnormality detecting of an image editing pro-
F48X,
cessing part
F49X
F4DX,
Abnormality detecting in the Entity Manage-
F4EX
ment Department
F4FX
Abnormality detecting in the JOB Management
Department
F50X
Abnormality detecting in the FAX Management
Department
F51X,
Abnormality detecting in a JOB execution part
F52X,
F53X,
F55X,
F56X,
F57X
F58X,
Abnormality detecting in the various-services
F59X,
Management Department
F5AX,
F5BX,
F5CX,
F5DX,
F5EX
Verification procedure & check point
(1) Carry out U021 Main backup initialization and perform an opera-
tion check.
(2) Exchange a Main/Engine PWB and perform an operation check.
(3) Get USBLOG and contact service headquarters.
(2) the acquisition wish of USBLOG -- carry out
(Depending on the (2) case, it is print capture data acquisition)
(1) Carry out U021 Main backup initialization and perform an opera-
tion check.
(2) Exchange a Main/Engine PWB and perform an operation check.
(3) Get USBLOG and contact service headquarters.
(1) Carry out U021 Main backup initialization and perform an opera-
tion check.
(2) Exchange a Main/Engine PWB and perform an operation check.
(3) Get USBLOG and contact service headquarters.
(1) Carry out U021 Main backup initialization and perform an opera-
tion check.
(2) Exchange a Main/Engine PWB and perform an operation check.
(3) Get USBLOG and contact service headquarters.
(1) Carry out U021 Main backup initialization and perform an opera-
tion check.
(2) Exchange a Main/Engine PWB and perform an operation check.
(3) Get USBLOG and contact service headquarters.
(1) Carry out U021 Main backup initialization and perform an opera-
tion check.
(2) Exchange a Main/Engine PWB and perform an operation check.
(3) Get USBLOG and contact service headquarters.
(1) Carry out U021 Main backup initialization and perform an opera-
tion check.
(2) Exchange a Main/Engine PWB and perform an operation check.
(3) Get USBLOG and contact service headquarters.
Remarks
* F46F is the abnormalities of a printer
process.In recurring by specific printer
data, please give me cooperation at
acquisition of capture data and
USBLOG.
Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of acquisi-
tion.
Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of acquisi-
tion.
Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of acquisi-
tion.
Since the USB log at the time of occur-
rence is needed for analysis, please
give me cooperation of acquisition.
7-35
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA-1
TSI model LCD model
[Main/Engine PWB<=>Option [Main/Engine PWB<=>Option
DIMM] DIMM]
YS500 YS500
[Main/Engine PWB<=>Option [Main/Engine PWB<=>Option
DIMM] DIMM]
YS500 YS500
Not Support(F49X) Not Support(F49X)
[Main/Engine PWB<=>Option [Main/Engine PWB<=>Option
DIMM] DIMM]
YS500 YS500
[Main/Engine PWB<=>Option [Main/Engine PWB<=>Option
DIMM] DIMM]
YS500 YS500
[Main/Engine PWB<=>Option [Main/Engine PWB<=>Option
DIMM] DIMM]
YS500 YS500
No flash memory for FAX data No flash memory for FAX data
HDD non-standard HDD non-standard
[Main<=>FAX] [Main<=>FAX]
Main/Engine PWB: YC508 Main/Engine PWB: YC508
FAX PWB: CN4 FAX PWB: CN4
[Main/Engine PWB<=>Option [Main/Engine PWB<=>Option
DIMM] DIMM]
YS500 YS500
F5DX (especially X is 9, A, B, C or F5DX (especially X is 9, A, B, C or
D) occurs at Fax reception or D) occurs at Fax reception or
URDS related process. Check URDS related process. Check
transmission data from PC transmission data from PC
[Main/Engine PWB<=>Option [Main/Engine PWB<=>Option
DIMM] DIMM]
YS500 YS500