Kyocera ECOSYS M2135dn Service Manual page 290

U201 Initializing the touch panel
(Message: Init Touch Panel)
Contents
Adjusts touch panel detecting positions.
Purpose
Correct and confirm the touch panel detecting positions, when the panel PWB or the operation
panel is replaced or if the detecting positions are not aligned.
Method
1.Press the [Start] key.
2.Select the item to execute.
3.Press the [Start] key.
* :The screen for executing is displayed.
Items
Initialize
Check
Method: Initialize
1.Press the center of "+".
2.Press the center of "+".
Automatically corrects the touch panel display position
Checks the touch panel display position
6-35
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
*: TSI model only
Contents
+
+