Reissued:21-Apr-14
Model:
Aries-P1.5/C1.5
NOTE: See photo and diagram below for reference on the appropriate amount of
pressure that should be applied when polishing the belt.
4. After polishing the fusing belt, put back the fusing unit.
5. Print out sample copies to check if vertical lines appear or not.
NOTE
Make sure to polish the belt scratches caused by front (operator) and rear (non-
operator) edges of the paper.
echnical
T
B
ulletin
Date:
10-Mar-14
PAGE: 70/75
No.:
RM077107b