Ricoh Pro C901 Technical Bulletin page 420

Model:
Aries-P1.5/C1.5
Subject:
Preventing toner offset on paper edges
From:
1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
GENERAL
This bulletin provides procedures on how to prevent toner from off-setting to the edges of
paper –a symptom more noticeable when the printouts are stacked– as a result of a dirty
paper exit unit.
PROCEDURE
1. Disassemble the de-curler unit and clean the rollers inside.
2. If the problem persists, replace the discharge brushes (indicated in red below) in the
de-curler unit.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
22-Jul-13
Prepared by:
Part information
Electrical
Transmit/receive
Other ( )
PAGE: 1/2
No.:
RM077097
H. Kawamura
Action required
Service manual revision
Retrofit information
Tier 2