Ricoh Pro C901 Technical Bulletin page 219

Model:
Aries-P1.5/C1.5
Solution
Replace the current slide-rails with the modified slide-rails for C, M, and Y stations either on new installs or a
service visit for the affected units shown on the following page.
NA
The modified slide-rails are either attached to the mainframe as an accessory or have already been shipped
to the local service stations.
RE / Asia
Procure the modified slide-rails by referring to the information below.
Part Number
M0779901 SLIDE RAIL:DEVELOPMENT UNIT
Details of the Modified Slide-rail
The hole in the Slide-rail was enlarged to allow the latch on the Stay to reach the projection.
NOTE 1
The modified slide-rails are indicated with a white marking.
NOTE 2
Instead of modifying the Stay which had the incorrect dimensions, the Slide-rails were modified because
replacement of the Stay is complex and is inappropriate to carry out in the field. Replacement with the
modified Slide-rails will have no adverse affect on the durability of the Stay and enables proper latching of
the two components.
Yellow
T
echnical
Description
0.4 ~0.5mm
White Marking
Magenta
Cyan
B
ulletin
Date:
04-Nov-11
3 pcs required per unit
Hole in the slide-rail was
enlarged 0.4~0.5mm.
Replace the 3 slide-rails installed
in the right hand side of Cyan,
Magenta, and Yellow stations.
PAGE: 2/7
No.:
RM077049
Remark