Reissued:05-Mar-14
Model:
Aries-P1.5/C1.5
Photo 3
Tap here
How to check if the aperture is clogged or not
1. Remove the development unit from the mainframe and place it on a table.
2. Loosen the 4 screws circled in yellow.
3. Slightly lift up the guide rail as you move it in the direction indicated with the arrow.
4. Release the hook (indicated in red in the left photo) and remove the cover to disclose
the aperture.
echnical
T
B
Photo 4
ulletin
Date:
01-Mar-13
PAGE: 2/5
No.:
RM077086c