Ricoh Pro C901 Technical Bulletin page 419

Model:
Aries-P1.5
Subject:
New service part - BALL BEARING: REGISTRATION:
DRIVEN: FRONT
From:
1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
Change: The following part was added as an individual service part.
Reason: To prevent breakage of the ball bearing that supports the registration roller at the
front side of the machine
23. Paper Registration 8 (D095/M077)
New P/N
BALLBEARING:REGISTRATION:DRIVEN:
M0777430
FRONT
Note:
The newly registered ball bearing is only used for this location. Make sure to use the ball
bearing of the old type for all other locations.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
Description
B
ulletin
Date:
19-Jul-13
Prepared by: T. Miyamoto
Part information
Electrical
Transmit/receive
Other ( )
Q'ty
1
p/n M0777430
BALL BEARING: REGISTRATION: DRIVEN: FRONT
PAGE: 1/1
No.:
RM077096
Action required
Service manual revision
Retrofit information
Tier 2
Int Page Index Note
- 71 1 Add