Ricoh Pro C901 Technical Bulletin page 302

Reissued:07-Aug-12
Model:
Aries-P1.5/C1.5
7. Remove the COVER:BIAS:DEVELOPMENT ROLLER. (screw x1, snap-fit x1)
* Keep the screw and the snap-fit. They will be used when reassembling the unit.
8. Remove the HOLDER:DEVELOPMENT VIAS:ASS'Y. (screw x3)
9. Remove the HOLDER:DEVELOPMENT BIAS:ASS'Y by slightly pulling it towards the
direction indicated by A, and then, rotate it counterclockwise as indicated by B in the
photo below.
T
echnical
A
B
B
ulletin
Date:
21-Mar-12
Snap fit at side
COVER:BIAS:DEVELOPMENT
ROLLER
HOLDER:DEVELOPMENT
BIAS:ASS'Y
Screw:M4:
Exterior
PAGE: 6/8
No.:
RM077067a