Reissued: 28th-Sep-12
Model:
AG-P1/C1, AGL-P1/C1, Aries-P1.5/C1.5
3. Handling the Development Unit
Take note of the information in the following section to avoid the problems listed
below.
1) Variation in image density
2) Different density between left and right sides on a page
3) Toner adhesion to the development rollers
4) Scratches on the drums resulting from toner adhesion to the development rollers
5) Toner clumps caused by narrowed PG
Always hold the prescribed locations when handling the development unit.
Never apply external pressure to the front and rear plates and the stay.
Hold both ends when carrying the development unit.
Face plate - Front
Do not grip the face plates or the stay.
Applying external pressure will deform
the front and rear plates in vertical and
horizontal directions, resulting in
fluctuation of the PG.
echnical
T
B
Stay
Vertical direction
ulletin
Date:
06-Dec-10
Face plate - Rear
Horizontal direction
PAGE: 6/6
No.:
RG178128c