Ricoh Pro C901 Technical Bulletin page 137

Reissued:18-Apr-14
Model:
Aries-P1.5/C1.5
5. Do "No.203 Execute Photoconductor Refreshing" in the Adjustment Settings for Skilled
Operators Menu for the affected color and check the results with the customer job.
Are the results accepted by the customer?
YES: Finished (Refer to Lines No 4, below this procedure)
NO: Go to the next step.
6. Do "No.208 Execute Toner Refreshing" in the Adjustment Settings for Skilled Operators
Menu for the affected color and check the results with the customer job.
Are the results accepted by the customer?
YES: Finished (Refer to Lines No 4, below this procedure)
NO: Go to the next step.
7. Clean the "doctor gap" of the development unit of the affected color and check the
results with the customer job.
Are the results accepted by the customer?
YES: Finished (Refer to Lines No 5, below this procedure)
NO: Go to the next step.
8. Replace the developer of the affected color by referring to the procedures in RTB
RM077072a.
echnical
T B
ulletin
Date:
16-May-11
PAGE: 2/10
No.:
RM077031d