Ricoh Pro C901 Technical Bulletin page 166

Model:
Aries-P1.5/C1.5
Step B-11. Remove the brackets for the junction gates.
Remove the 2 screws for the upper and lower junction gates respectively.
Disconnect the harness from the motor.
Bracket for lower junction gate
Bracket for upper
junction gate
Be careful not to drop the white bushing from the bracket.
Lower junction gate
Remove the feeler attached to the rear side of the lower junction gate
and remove the lower junction gate.
T B
echnical
White bushing
Do NOT drop and lose this bushing.
ulletin
Date:
15-Jun-11
Lower junction gate feeler
PAGE: 14/39
No.:
RM077037