Ricoh Pro C901 Technical Bulletin page 30

Model:
Aries-P1.5/C1.5
Subject:
Apply auxiliary tray for SR5020
From:
PPBG Service Planning Dept.
Troubleshooting
Classification:
Mechanical
Paper path
Product Safety
Information in this RTB applies only to the NA market.
General
When the Booklet Finisher (SR5020) is in use with ProC901/C901s, coated thin paper fed out to
the finisher shift tray could result in poor stacking or jam.
Reason: High friction between the shift tray and coated thin paper
Solution: Attach the following auxiliary part to the finisher shift tray.
Part Number
D4349901
Please note that the Booklet Finisher registered with S/N V5301200075 or newer includes this
auxiliary tray as an accessory.
The auxiliary tray should be used in the following conditions:
S/N of the Booklet Finisher is V5301200075 or older
Booklet Finisher is connected to Pro C901/C901s
Paper type is "Coated & Thin"
Poor stacking on the shift tray
Attaching the Auxiliary Tray:
1. Press the "Stop" button on the Booklet Finisher.
2. If any, remove paper from the shift tray.
3. Pull out the extension tray.
4. Align the projection on the auxiliary tray with the back fence.
5. Press the "Stop" button to resume printing.
T B
echnical
Part information
Electrical
Transmit/receive
Other (
Description
MODIFICATION :Tray: Auxiliary : Stack
ulletin
Date:
19-Jan-11
Prepared by:
H. Matsui
Action required
Service manual revision
Retrofit information
) Tier 2
PAGE: 1/1
No.:
RM077014