Reissued:21-Apr-14
Model:
Aries-P1.5/C1.5
2-7. After confirming no further loose developer pouring from the unit, place the unit in the
normal orientation and turn the development rollers (Mag rollers) to convey the
developer adhered to the Mag rollers to the Development auger. Keep turning the
Mag rollers until the Mag rollers are clear of old developer.
* You may remove the gear covers as shown below to turn the Mag rollers more
easily.
2-8. Repeat steps 2-5 and 2-6 to completely clear out the old developer.
echnical
T
B
ulletin
Date:
10-Mar-14
PAGE: 61/75
No.:
RM077107b