Ricoh Pro C901 Technical Bulletin page 241

Model:
Aries-P1.5/C1.5
CIS Luminance Adjustment Flow Chart
Print 50 pages in simplex.
Change the CIS luminance from 1.6 to 3.0 in
the Color Paper Edge Detection Adjustment,
and then print another 50 pages in simplex.
Increase the CIS luminance to 4.0 in the
Color Paper Edge Detection Adjustment, and
then print another 50 pages in simplex.
Increase the CIS luminance to 5.0 in the
Color Paper Edge Detection Adjustment, and
then print another 50 pages in simplex.
Important
Although the Color Paper Edge Detection Adjustment allows the CIS luminance level to range
between 1 and 5, setting this value to a high level could cause the LED to reach its life quickly.
Therefore, it is recommended that the CIS luminance is set to approximately 3.5.
Also, if jobs applying colored paper are to be run regularly, the CIS luminance level should be
adjusted for each occasion.
T
echnical
J098 issued?
Yes
J098 issued?
Yes
J098 issued?
Yes
J098 issued?
Yes
Solution unavailable
B
ulletin
Date:
14-Dec-11
No
Finish
Decrease the CIS luminance 0.5 in the
Color Paper Edge Detection
No
Adjustment, and then print another 50
pages in simplex.
Increase the CIS luminance 0.5 from
the present value and complete the
procedure.
No
NOTE
The purpose of the procedure to
decrease the CIS luminance by 0.5
until J098 reoccurs is to set the CIS
luminance level as low as possible
(to allow longer LED life).
No
If further adjustments cannot be made by increasing the
CIS luminance, complete the procedure after making
the following 2 settings in the Advanced Settings.
- Skew Detection Off
- Deactivate Image Position Adjustment
PAGE: 2/5
No.:
RM077053
Repeat this procedure
until J098 occurs.
J098 issued?
Yes
Finish
Activate
No