Ricoh Pro C901 Technical Bulletin page 174

Model:
Aries-P1.5/C1.5
Step B-25. Remove the lower exit guide plate. (screw x4)
Remove the junction gate bushing, sensor bracket (screw x1; rear), and the guide plate (screw x4).
Front
View of the reverse side of the
lower exit guide plate
Front
T
echnical
Lower Exit
Guide Plate
分岐爪軸受
Rear
B
ulletin
Date:
15-Jun-11
Rear
Sensor bracket
Hold the front side of the guide plate and flip it over.
Release the 4 harness clamps and disconnect the
connector from the sensor.
PAGE: 22/39
No.:
RM077037