Reissued:21-Apr-14
Model:
Aries-P1.5/C1.5
- Procedure 1 -
The goal of this procedure is to decrease the Tc (toner concentration) to allow proper
removal of remaining developer and achieve optimum ratio of toner against developer
when initializing the new developer.
IMPORTANT: Make sure this "Procedure 1" is carried out before "Procedure 2".
1-1. Check the current Vt values in SP 3-001-001~004.
If the current Vt value is
If the current Vt value is
Table 1: Current Vt Value Display
001
3-001
002
003
004
1-2. Change the default (0: PID) to
Table 2: Toner Supply Mode
001
3-301
002
003
004
1-3. Print full-page solid patterns for the affected color(s) by referring to table 3 below
which describes the approximate required number of copies of the full-page solid
pattern according to the Vt confirmed in step 1.
If more than one color is affected, specify 2 affected colors when printing the solid
patterns to save time and paper, i.e. R (Y+M), G (Y+C), B (M+C).
* When printing the test pattern, black can also be mixed with the affected color, for
instance, K+Y.
* Work time can be reduced by using the copy function for the Copier model, and
printing the patterns from the Command Work Station using the calibration chart
(which allows to specify number of copies) for the Printer model.
Table 3:
Reference for required number of copies of the full-page solid pattern
Current Vt value (V)
SP3-001-001~004
2.2
2.0
1.8
1.6
1.4
1-4. Set the toner supply mode SP (SP3-301-001~004; Table 2) back to the default "0:
PID".
IMPORTANT
Make sure to set the toner supply mode (SP3-301-001~004) back to the
default "0: PID" before completing the procedure, otherwise toner will
not be supplied and cause problems.
echnical
T
equal to or greater than
smaller than
SP
ID Sn: Vt display
Current val: K
ID Sn: Vt display
Current val: C
ID Sn: Vt display
Current val: M
ID Sn: Vt display
Current val: Y
"1: No toner supply"
SP
Tnr Supply DFU
K
Tnr Supply DFU
C
Tnr Supply DFU
M
Tnr Supply DFU
Y
Required number of copies of
the full-page solid pattern
Long edge
(A3, B4, DLT)
13
26
39
52
66
ulletin
B
Date:
10-Mar-14
2.4V, complete the procedure.
2.4V, proceed to step 2.
in SP3-301-001~004.
Default
0: PID
1: No toner supply
0: PID
1: No toner supply
0: PID
1: No toner supply
0: PID
1: No toner supply
Short edge
(A4, LT)
26
52
79
105
131
PAGE: 56/75
No.:
RM077107b
Change to