Alcatel-Lucent 7330 Product Information Manual page 28

1 — ONT and MDU overview
•
network demarcation for all services
•
PON reach capacity: minimum 18.6 mi (30 km) and maximum 37.3 mi (60 km)
depending on the optical budget supported by the LT card used, the PON reach
specified based on network deployments, and the losses of optical fiber,
connectors, and splitters, and so on.
Table
the specific features, functions and limitations.
Package
type
A
(1 of 6)
1-4
1-1 lists the ONTs and MDUs categorized into package types and describes
Warning —
Existing ONTs that use 7342 ISAM FTTU releases older
than R04.06.xx and R04.07.xx must be upgraded to use R04.00.10
software while assigned to a PON ID value smaller than 64. For this
purpose, if split ratios larger than 1:64 are being deployed, you may
choose to set aside the first PON ID as a staging point.
Table 1-1 ONTs and MDUs general descriptions per package type
ONT or MDU See UDS
mnemonic chapter
I-010G-A 7
I-020E-B 9
I-020E-H 9
I-020G-F 9
I-220E-A 12
I-241G-A 13
O-421E-B 18
December 2010
ONT Product Information Guide Edition 01
Features and functions
AES with operator enable/disable
per port-ID level
Single mode fiber and use 2x5 SFF
SC/APC optical port
Optical budget of 28 dB (without
FEC) and an Rx optical sensitivity
of -27 dB
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
Considerations and
limitations
See Package A ONT
considerations and
limitations
FEC is not supported
on the following
ONTs:
•
I-020E-B
•
I-020E-H
•
I-020E-B
•
O-421E-B
3FE 54017 AAAA TCZZA