Alcatel-Lucent 7330 Product Information Manual page 10

ETSI ONT safety guidelines
The Warning box indicates that the described activity or situation may, or will, cause
equipment damage, loss of data, or serious performance problems. It identifies a
possible equipment-damaging situation or provides essential information to avoid
the degradation of system operations or data.
Do not proceed beyond a warning until the indicated conditions are fully understood
and met.
The following is an example of the Caution box.
The Caution box indicates that the described activity or situation may, or will, cause
service interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood
and met.
The following is an example of the Note box.
The Note box provides information that assists the personnel working with ONTs. It
does not provide safety-related instructions.
Safety-related labels
The ONT equipment is labeled with the specific safety instructions and compliance
information that is related to a variant of the ONT. Observe the instructions on the
safety labels.
Table
Description
ESD warning
Laser classification
PSE marking
Figure
x
Caution 1 —
Possibility of service interruption.
Caution 2 —
Service interruption.
Note —
Information of special interest.
1 provides sample safety labels on the ONT equipment.
Label text
Caution: This assembly contains an electrostatic sensitive device.
Class 1 laser product
These power supplies are Japan PSE certified and compliant with
Japan VCCI emissions standards.
1 shows the PSE certification.
December 2010
ONT Product Information Guide Edition 01
Table 1 Safety labels
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA