Alcatel-Lucent 7330 Product Information Manual page 198
Intelligent services access manager fiber to the node
Hide thumbs
Also See for 7330:
- Information manual (1074 pages) ,
- Product information manual (420 pages) ,
- Operation and maintenance (20 pages)
Advertisement
5 — ONT management using an ONT interface
5
6
7
8
5-66
Perform one of the following to activate the dial tone:
a
For a volatile decimal SLID, dial "*":
b
For a volatile hexadecimal SLID, dial "0*".
c
For a permanent decimal SLID:
Dial "9* to deliver the SLID to the P-OLT using the proprietary PLOAM
•
message.
Dial "8*" to deliver the SLID to the P-OLT using the password PLOAM
•
message defined in G.984.3
d
For a permanent hexadecimal SLID:
Dial "90* to deliver the SLID to the P-OLT using the proprietary PLOAM
•
message.
Dial "80*" to deliver the SLID to the P-OLT using the password PLOAM
•
message defined in G.984.3
The dial tone is activated.
After the dial tone is activated, perform one of the following to dial the SLID
value:
a
For a decimal SLID, dial the SLID value up to 10 digits long.
b
For a hexadecimal SLID, dial the SLID value up to 20 digits long. Only digits
in the range 0 to 9 are accepted.
Dial "#" to send the SLID number to the ONT.
The ONT exits the SLID input mode and enters the SLID output mode, and sends
confirmation tone and SLID number. If a hexadecimal SLID is less than 20 digits,
the ONT automatically appends zeroes to the end of the SLID.
Verify that the SLID was entered correctly.
December 2010
ONT Product Information Guide Edition 01
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
Advertisement
