Alcatel-Lucent 7330 Product Information Manual page 204

5 — ONT management using an ONT interface
XML parameter Parameter values
wpaVer Specifies the WPA version. The value is an
integer from 1 to 2.
encryptionAlgo Specifies the encryption algorithm used.
The options are:
•
•
personalKey Specifies the encryption key. The key is an
alphanumeric string of 0 to 32 characters
groupKeyRenewal Specifies the encryption key renewal
period. The value, in seconds, ranges from 1
to 65535 seconds. The default is 900 s (15
minutes)
radiusServerIp Specifies the IPv4 address of the
authenticating RADIUS server. The value is
an IP address in v4 format.
radiusPort Specifies the port of the authenticating
RADIUS server. The value is a port number
(integer) from 1 to 65535. The default is
1812.
Hardware configuration -- layer 3 profile extension
layer3PortMapping Specifies the Layer 3 port mapping bitmap
setting. Bit 31 to Bit 4 are reserved. Bit 3:
LAN port 4; Bit 2: LAN port 3; Bit 1: LAN port
2; Bit 0: LAN port 1. The options are:
•
•
WEP personal security configuration
You can configure the parameters when the secMode is set to wep
wepKeydefault Specifies the default WEP key value. The
value is an integer from 1 to 4.
wepPassphrase Specifies the WEP passphrase. algorithm
used. The value is a string from 1 to 8
hexidecimal characters.
wepKeyLen Specifies the WEP key length. The value is
40 or 104.
wepKey1~4 Specifies the first to fourth WEP keys. Each
key is a string of 1 to 40 characters.
radiusServerIp Specifies the IPv4 address of the
authenticating RADIUS server. The value is
an IP address in v4 format.
radiusPort Specifies the port of the authenticating
RADIUS server. The value is a port number
(integer) from 1 to 65535. The default is
1812.
SSID 2 security configuration
You can configure two sets of SSID parameters. repeat the above parameters substituting Wifi2 for Wifi1
(5 of 5)
5-72
aes
tkip
0: disabled Layer 3 functions at this port
1: enable Layer 3 functions at this port
December 2010
ONT Product Information Guide Edition 01
Sample XML
<Wifi1SecuWpaEnterprise
wpaVer="1"
encryptionAlgo="tkip"
radiusServerIp=""
radiusPort="1812"
enterpriseKey=""
keyRenwal="900" />
<Layer3Profile>
<Layer3PortMapping>0x000000
07</Layer3PortMapping>
</Layer3Profile>
</HW_Configuration>
<Wifi1SecuWep
wepKeydefault="1"
wepPassphrase="" wepKey1=""
wepKey2="" wepKey3=""
wepKey4="" />
</WifiSsid1>
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
Information
—
—
—
—
—
—
For example:
0x00000007 will
enable L3
function in port
1/2/3; 0x8 will
enable L3
function in port
4
—
—
—
—
—
—