Alcatel-Lucent 7330 Product Information Manual page 166

5 — ONT management using an ONT interface
Procedures using CLI interface
The following procedure provides the steps to check the status of the ONT LEDs
using the CLI interface.
Procedure 5-20 To check the status of LEDs
1
2
3
4
5
Procedures using HTTP interface for Package C ONTs
Not applicable.
5-34
Choose option 8, More options, from the
appears.
Choose option 6, Retrieve ONT LED status, from the secondary menu.
The ONT LEDs appear with their color, current LED state, and previous LED state
shown. For example:
In print_led_states
LED COLOR
===================================
EQPT GREEN
PON GREEN
IPTV GREEN
RFTV GREEN
POTS GREEN
MGMT GREEN
NTWK GREEN
DATA GREEN
VID GREEN
FAIL GREEN
BTRY GREEN
MOCA GREEN
PWR_LED GREEN
ALM_LED GREEN
WAN_LED RED
press enter key to continue...
where
LED is the mnemonic for an LED on the ONT. Each LED represents a condition or activity on the
ONT, such as the condition of the battery or the activity of a data link; see Table
explanation of each LED.
COLOR is the color of the LED. The color of the LED represents the status of a condition or activity
on the ONT, such as red for failing battery or green for activity on the data link; see ONT-specific
unit data sheet for the meaning of a color for a specific LED and ONT type.
CURSTATE represents the current LED state, where OFF means the LED is not lit, ON means that
the LED is lit and the color is solid.
PRESTATE represents the previous state of the LED, where OFF means that the LED was not lit,
and ON means that the LED was lit and the color was solid.
Press ↵ to continue.
Choose option 11, Return to main menu, to return to main menu.
STOP. This procedure is complete.
December 2010
ONT Product Information Guide Edition 01
Main menu. The
CURSTATE PRESTATE
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ON ON
OFF OFF
ON ON
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
Secondary menu
5-7 for an
3FE 54017 AAAA TCZZA