Alcatel-Lucent 7330 Product Information Manual page 148

5 — ONT management using an ONT interface
Procedure 5-7 To access the CLI interface using a craft port
1
2
3
4
Procedure 5-8 To access the CLI interface using an Ethernet port
1
2
3
4
5-16
Connect a laptop via serial cable to the RS-232 connector on the ONT.
Configure the communications software to the following settings:
bits/second = 9600
•
data bits = 8
•
parity = None (N)
•
stop bits = 1
•
terminal emulation = VT100
•
Log in to a craft session:
<L>ogin
User Name:CRAFTSPERSON
Password:ALC#FGU
where
User Name is the username for the ONT
Password is the password for the ONT
The SLID menu appears.
STOP. This procedure is complete.
Connect a computer or laptop to an Ethernet port on the ONT using an Ethernet
cable.
Press the Reset button on the ONT. The ONT reboots with an enabled Telnet
server.
Start a Telnet session and Telnet to the ONT at 192.168.1.251.
Configure the IP address on the laptop Ethernet port to 192.168.1.x. For example,
192.168.1.100.
December 2010
ONT Product Information Guide Edition 01
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA