Alcatel-Lucent 7330 Product Information Manual page 254

3
4
5
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
Disconnect the POTS, Ethernet, coaxial, and power cables from the ONT
(DLP 124); see Figures NTP 125-1
Figure NTP 125-1: I-240G-B indoor ONT connections
POTS1 POTS2
1
U
S
B
2
Phone
connectors
(RJ-11)
Figure NTP 125-2: I-241G-B indoor ONT connections
POTS1 POTS2
1
U
S
B
2
TV
RF video Phone
coaxial connectors
connector (RJ-11)
Disconnect the SC/APC adaptor from the fiber optic connector on the ONT
(DLP 125); see Figures NTP 125-1
Replace the ONT with a new unit:
a On a flat surface, such as a desk, substitute a replacement ONT for the old
ONT; go to step 6.
b In a stand.
i Unsnap the old ONT from the channels built into the stand. Snap the
new ONT into channels built into the stand, ensuring it is securely held.
ii Place the replacement ONT with stand vertically on a flat surface; go to
step 6.
c On a wall.
i Slide the old ONT upward and then away from the two mounting screws
until the ONT is free of the wall.
ii Slide the wall mount keyholes on the ONT enclosure or fiber storage tray
of the replacement ONT down over the mounting screws until it is
securely seated.
December 2010
Edition 01 ONT Product Information Guide
NTP 125 — Replace an I-240G-B or I-241G-B indoor ONT
and NTP 125-2.
Power connector
LAN1 LAN2 LAN3 LAN4
Ethernet On/off
ports
(RJ-45)
Power connector
LAN1 LAN2 LAN3 LAN4
Ethernet On/off
ports
(RJ-45)
and NTP 125-2.
Fiber
POWER
optic
connector
21342
Fiber
POWER
optic
connector
20429
NTP 125-3