Alcatel-Lucent 7330 Product Information Manual page 225
Intelligent services access manager fiber to the node
Hide thumbs
Also See for 7330:
- Information manual (1074 pages) ,
- Product information manual (420 pages) ,
- Operation and maintenance (20 pages)
Advertisement
NTP 121 — Install an I-241G-A indoor ONT
NTP 121-4
Figure NTP 121-2: ONT in a stand mount
iii
Go to step 4.
c
In the wall mount bracket.
i
Measure and drill two holes in the wall where the ONT will be mounted.
The holes should be the same distance apart as the holes on the wall
mounting bracket (83.3 mm apart, or 3.28 in).
ii
Place mounting screws or bolts in the wall.
iii
Lay the mounting bracket flat on a table.
iv
Slide the ONT down over the mounting bracket until the fiber optic port
is directly in front of the fiber optic port cable lead, as shown in
Figure
NTP
121-3.
December 2010
ONT Product Information Guide Edition 01
EQPT
PON
MGMT
Data 2
Data 1
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
19660
Advertisement
