Alcatel-Lucent 7330 Product Information Manual page 181

4
5
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
-- ARP --
ff ff ff ff ff ff 00 e0 b1 7a 00 c0 08 06 00 01
08 00 06 04 00 01 00 e0 b1 7a 00 c0 ac 16 b5 41
00 00 00 00 00 00 ac 16 b5 4e b1 7a 00 c0 77 19
00 00 00 00 00 00 00 00 00 00 00 00
You can use a product, such as Wireshark, to decode traces.
d Choose option 4 for IGMP.
Tracing IGMP traffic allows you to monitor IGMP messages between host
devices and the ONT, and between the ONT and the LT to ensure proper IPTV
or IP video service to subscribers.
After you choose a protocol, the following trace options appear:
Trace options
===============
1. Real-time traces
2. Enable logging
3. Disable logging
Enter choice :
Perform one of the following:
a To view trace statements in real time:
i Choose option 1, Real-time traces. The system responds by displaying
trace statements.
Press enter key to disable real-time tracing at any
time...
To stop the display of trace statements, press ↵. The system responds
ii
by displaying the
dbg_logger: disabling this console
b To enable logging of trace statements:
i Choose option 2, Enable logging. The following message appears:
xxxx traces logging enabled
Press enter key to continue...
where xxxx is the selected protocol
Press ↵ to continue. The
ii
iii Specify the action for the system to take when log file is full using
Procedure 5-33.
iv Disable tracing, using Procedure 5-34.
v Copy the trace log to a TFTP server, using Procedure 5-35.
STOP. This procedure is complete.
December 2010
Edition 01 ONT Product Information Guide
5 — ONT management using an ONT interface
Secondary menu with the message:
Secondary menu appears.
5-49