Alcatel-Lucent 7330 Product Information Manual page 200

5 — ONT management using an ONT interface
5.15 XML file configuration data for package C ONTs
For ONTs that are shipped with an XML file already configured, the data that defines
L3 interface and WiFi behavior is pre-configured with default values. Use an XML
file editor to update the file to meet WiFi requirements. See the appropriate unit data
sheet for more information. Table lists the XML file configuration options, sample
XML, and parameter ranges.
XML parameter Parameter values
WAN interface configuration
instanceID Specifies the instance ID. Set to 1 and
cannot be changed
WANName Specifies the WAN name, an alphanumeric
string of 1 to 256 characters
IpGetMode Specifies the method used by the device to
retrieve its IPv4 address. The options are:
•
•
•
IpAddress Specifies the IPv4 address in dotted decimal
notation format. Can be configured when
IpGetMode is set to static.
PPPoEUserName Specifies the user name for the PPPoE
connection. Can be configured when
IpGetMode is set to pppoe.
PPPoEUserPasswd Specifies the user password for the PPPoE
connection. Can be configured when
IpGetMode is set to pppoe.
Gateway Specifies the IPv4 address of the network
device when the default IP address does not
match any routing table routes. Can be
configured when IpGetMode is set to dhcp
dnsdomainname Specifies the DNS domain name of the DHCP
gateway device. Can be configured when
IpGetMode is set to dhcp
DNSServer1 Specifies the DNS primary server IP address
for the DHCP gateway device. Can be
configured when IpGetMode is set to dhcp
DNSServer2 Specifies the DNS secondary server IP
address for the DHCP gateway device. Can
be configured when IpGetMode is set to
dhcp
LAN type
(1 of 5)
5-68
Table 5-11 XML file configuration data for package C ONTs
static
dhcp
pppoe
December 2010
ONT Product Information Guide Edition 01
Sample XML
<Layer3>
<WANInterface
NumberOfInstance="1"
MaxNumber="1">
<WANInterfaceConfig
InstanceID="1"
WANName="wan1"
IpGetMode="static"
IpAddress="222.10.60.88"
SubMask="255.255.255.0"
PPPoEUserName=""
PPPoEUserPasswd=""
Gateway="222.10.60.254"
DNSDomainName="tele.com"
DNSServer1="210.11.123.13"
DNSServer2="210.11.123.13"
WANID="1"/>
</WANInterface>
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
Information
—
—
Use standard
IPv4 addressing
for static.
—
—
—
—
—
—
—